Grinding stone, conical, KE hardness M
Mounted points in hardness M are manufactured from a grain mix of tough, dark red and easy-to-break-down, white aluminium oxide in a vitrified bond.
This grain combination leads to a good balance between stock removal rate and tool life.
The hardness M is the most universally used bond for work on steel and cast steel.
- The maximum permitted rotational speed refers to the unsupported shank length of 10 mm
This grain combination leads to a good balance between stock removal rate and tool life.
The hardness M is the most universally used bond for work on steel and cast steel.
- The maximum permitted rotational speed refers to the unsupported shank length of 10 mm
- 4
- 1
- 2
- 2
- 1
- 1
- 1
- 2
- 1
- 2
8 of Grinding stone, conical, KE hardness M
| Product | Lining material | Granulation | Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Non-woven abr. pin con. 1025 6 ADW 46 M 5V | 46 | 10 | €3.62/piece | ||
| Mounted point conical shape KE grain 46 hardness M ADW 3232/6 | Aluminium oxide | 46 | 32 | €4.22/piece | |
| Non-woven abr. pin con. 1645 6 ADW 46 M 5V | 16 | €5.50/piece | |||
| Non-woven abr. pin con. 2032 6 ADW 30 M 5V | 30 | 20 | €4.36/piece | ||
| Grinding pin KE 2545 6 ADW 30 M 5V | Aluminium oxide | 30 | 25 | €4.40/piece | |
| Mounted point conical shape KE grain 60 hardness M ADW 2032/6 | Aluminium oxide | 60 | 20 | €3.49/piece | |
| Mounted point conical shape KE grain 24 hardness M ADW 3232/6 | Aluminium oxide | 24 | 32 | €4.22/piece | |
| Cone grinding point 2040 6 ADW 30 M 5V | €4.94/piece |