GS 100 U - roughing end mill with fine teeth type 3365
Design: Ultra-fine grit solid carbide, DIN 6527, 30°, fire-coated, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
With inner cooling: Increase in tool life of up to 50%, since chip blockage is reduced.
Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
With inner cooling: Increase in tool life of up to 50%, since chip blockage is reduced.
Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish.
- 1
- 1
- 1
- 1
- 1
- 1
- 3
3 of GS 100 U - roughing end mill with fine teeth type 3365
| Product | Type | Diameter [mm] | Maximum working length [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Roughing mill with fine teeth GS 100 U FIRE 03365 DIN6527LNRf hard metal mb M10 | Roughing cutter | 10 | 22 | €356.20/piece | |
| Roughing mill with fine teeth GS 100 U FIRE 03365 DIN6527LNRf hard metal mb M6 | Roughing cutter | 6 | 13 | €299.56/piece | |
| Roughing mill with fine teeth GS 100 U FIRE 03365 DIN6527LNRf hard metal mb M12 | Roughing cutter | 12 | 26 | €434.69/piece |