Shell end mill HR TiAIN type 2013
Design: HSS Co8, DIN 1880, profile ground, with longitudinal and crosswise slot.
Application: Can be used as a surface, corner and rolling mill.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used as a surface, corner and rolling mill.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
- 1
- 1
- 1
- 1
- 1
- 5
- 1
- 4
5 of Shell end mill HR TiAIN type 2013
| Product | Diameter [mm] | Material | Shaft Diameter [m] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Shell end mill DIN1880 HSSCo8 TiALN type N 80x45mm | 80 | HSS-co | 27 | €298.52/piece | |
| Shell end mill DIN1880 HSSCo8 TiALN type N 40x32mm | 40 | HSS-co | 16 | €116.82/piece | |
| Shell end mill DIN1880 HSSCo8 TiALN type N 50x36mm | 50 | HSS-co | 22 | €153.13/piece | |
| Shell end mill DIN1880 HSSCo8 TiALN type N 100x50mm | 100 | HSS-co | 32 | €406.48/piece | |
| Shell end mill DIN1880 HSSCo8 TiALN type N 63x40mm | 63 | HSS-co | 27 | €205.07/piece |