Milling cutter with shank set, N, solid carbide, TiAIN type 2361
Design: Solid carbide (K10/K20).
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for universal machining. Feed is approx. 50% higher than with a 2-edged cutter. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for universal machining. Feed is approx. 50% higher than with a 2-edged cutter. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.
1 of Milling cutter with shank set, N, solid carbide, TiAIN type 2361
| Product | Type | Maximum working length [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|
| Milling cutter set lg. SCTiAlN 6-pc. 4-12mm | Milling cutter with shank | 72 | €242.24/piece |