Milling cutter with shank, N, solid carbide, TiAIN type 2375
Design: Solid carbide (K10/K20), type N, DIN 6527, with centre cut.
Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
- 4
- 1
- 1
- 1
- 1
11 of Milling cutter with shank, N, solid carbide, TiAIN type 2375
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Mill. cutter sh. DIN6527 SC TiALN T4 3.0mm | Milling cutter with shank | 5 | 6 | €16.97/piece | |
| Mill. cutter sh. DIN6527 SC TiALN T4 18mm | Milling cutter with shank | 24 | 18 | €119.78/piece | |
| Mill. cutter sh. DIN6527 SC TiALN T4 12mm | Milling cutter with shank | 16 | 12 | This product is no longer offered | |
| Mill. cutter sh. DIN6527 SC TiALN T4 14mm | Milling cutter with shank | 18 | 14 | €65.96/piece | |
| Mill. cutter sh. DIN6527 SC TiALN T4 20mm | Milling cutter with shank | 26 | 20 | This product is no longer offered | |
| Mill. cutter sh. DIN6527 SC TiALN T4 2.0mm | Milling cutter with shank | 4 | 6 | €17.57/piece | |
| Mill. cutter sh. DIN6527 SC TiALN T4 10mm | Milling cutter with shank | 14 | 10 | €37.58/piece | |
| Mill. cutter sh. DIN6527 SC TiALN T4 4.0mm | Milling cutter with shank | 8 | 6 | This product is no longer offered | |
| Mill. cutter sh. DIN6527 SC TiALN T4 16mm | Milling cutter with shank | 22 | 16 | €98.26/piece | |
| Mill. cutter sh. DIN6527 SC TiALN T4 6.0mm | Milling cutter with shank | 10 | 6 | This product is no longer offered | |
| Mill. cutter sh. DIN6527 SC TiALN T4 8.0mm | Milling cutter with shank | 12 | 8 | This product is no longer offered |