Eriks
FORMAT

Milling cutter with shank, N, solid carbide, TiAIN type 2361

Design: Solid carbide (K10/K20), DIN 6527, with centre cut.

Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible.

Application: Can be used for universal machining. Feed is approx. 50% higher than with a 2-edged cutter. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.
Image 1
Image 2
Image 1
Image 2
  • 4
  • 2
  • 2
  • 1
  • 1
13 of Milling cutter with shank, N, solid carbide, TiAIN type 2361
ProductTypeMaximum working length [mm]Shaft Diameter [mm]AvailablePriceexcl. VAT