Milling cutter with shank H, solid carbide, TiAIN type 2380
Design: Ultra-fine grit solid carbide, according to company standard, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.
Suitable for HSC machining up to 62 HRC.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.
Suitable for HSC machining up to 62 HRC.
- 1
- 1
- 1
- 1
- 1
7 of Milling cutter with shank H, solid carbide, TiAIN type 2380
| Product | Type | Maximum working length [mm] | Shaft diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Multi-t. end mill WHN SC TiALN shank HA T6 20mm | Multifunctional mill | 76 | 20 | €1,250.67/piece | |
| Multi-t. end mill WHN SC TiALN shank HA T6 10mm | Multifunctional mill | 46 | 10 | €98.28/piece | |
| Multi-t. end mill WHN SC TiALN shank HA T6 25mm | Multifunctional mill | 92 | 25 | €689.59/piece | |
| Multi-t. end mill WHN SC TiALN shank HA T6 8mm | Multifunctional mill | 36 | 8 | €63.16/piece | |
| Multi-t. end mill WHN SC TiALN shank HA T6 16mm | Multifunctional mill | 66 | 16 | €240.19/piece | |
| Multi-t. end mill WHN SC TiALN shank HA T6 12mm | Multifunctional mill | 56 | 12 | €144.03/piece | |
| Multi-t. end mill WHN SC TiALN shank HA T6 6mm | Multifunctional mill | 26 | 6 | €50.05/piece |