HR roughing end mill, solid carbide, TiAIN type 2393
Design: Ultra-fine grit solid carbide, type HR, according to company standard, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish.
Particularly suitable for machining stainless steeland for HSC machining up to 62 HRC.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish.
Particularly suitable for machining stainless steeland for HSC machining up to 62 HRC.
- 1
- 1
- 1
- 1
- 1
- 1
6 of HR roughing end mill, solid carbide, TiAIN type 2393
| Product | Type | Maximum working length [mm] | Total length [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Roughing end mill long DIN6527 SC TiALN type HR 16mm | Roughing cutter | 32 | 92 | €153.53/piece | |
| Roughing end mill long DIN6527 SC TiALN type HR 8mm | Roughing cutter | 19 | 63 | This product is no longer offered | |
| Roughing end mill long DIN6527 SC TiALN type HR 6mm | Roughing cutter | 13 | 57 | €143.88/piece | |
| Roughing end mill long DIN6527 SC TiALN type HR 12mm | Roughing cutter | 26 | 83 | This product is no longer offered | |
| Roughing end mill long DIN6527 SC TiALN type HR 20mm | Roughing cutter | 38 | 104 | €263.23/piece | |
| Roughing end mill long DIN6527 SC TiALN type HR 10mm | Roughing cutter | 22 | 72 | €75.58/piece |