O-rings
O-ring accessories include installation tools, lubricants, removal tools, and assortment kits for correct O-ring installation and maintenance. Using the proper accessories reduces assembly errors, the most common cause of premature O-ring failure in service. ERIKS supplies complete O-ring accessories alongside thousands of O-ring variants in NBR, EPDM, FKM, silicone, and PTFE in metric and imperial sizes, from a single source.
What are O-ring accessories?
O-ring accessories include tools, lubricants, kits, and measuring instruments for correctly installing, removing, measuring, and maintaining O-rings. These include insertion picks and hooks for damage-free installation, compatible greases and lubricants for controlled installation, sorted O-ring kits for maintenance, and groove measuring tools for confirming the correct size. Selecting the right accessories is just as important as choosing the correct O-ring: improper installation is the most common cause of premature failure in service.
Installation and removal tools
Proper installation tools prevent cutting, nicking, or overstretching of the O-ring during assembly. ERIKS supplies plastic and stainless steel picks and hooks in multiple profiles for different groove geometries. Plastic tools are preferred when metal contact may damage the sealing surface or groove.
Assembly lubricants and compounds
A compatible lubricant applied during assembly reduces friction and prevents the O-ring from rolling or twisting in the groove. The lubricant choice must be compatible with both the O-ring material and the process medium: silicone grease is compatible with NBR and EPDM, but must not be used on silicone O-rings, as this will cause swelling. ERIKS supplies assembly lubricants screened for compatibility with the full range of O-ring materials.
O-ring assortment kits
O-ring kits provide a sorted selection of sizes in a single material for maintenance and quick repair. ERIKS supplies kits in metric (DIN 3771) and imperial (AS568) standards in NBR, EPDM, and FKM, reducing response times in the event of unplanned downtime.
Choosing the right accessories
The selection of accessories is determined by the O-ring material, groove geometry, and media compatibility. ERIKS sealing specialists advise on the correct lubricant grade, tool profile, and kit configuration.
What are O-ring accessories?
O-ring accessories include tools, lubricants, kits, and measuring instruments for correctly installing, removing, measuring, and maintaining O-rings. These include insertion picks and hooks for damage-free installation, compatible greases and lubricants for controlled installation, sorted O-ring kits for maintenance, and groove measuring tools for confirming the correct size. Selecting the right accessories is just as important as choosing the correct O-ring: improper installation is the most common cause of premature failure in service.
Installation and removal tools
Proper installation tools prevent cutting, nicking, or overstretching of the O-ring during assembly. ERIKS supplies plastic and stainless steel picks and hooks in multiple profiles for different groove geometries. Plastic tools are preferred when metal contact may damage the sealing surface or groove.
Assembly lubricants and compounds
A compatible lubricant applied during assembly reduces friction and prevents the O-ring from rolling or twisting in the groove. The lubricant choice must be compatible with both the O-ring material and the process medium: silicone grease is compatible with NBR and EPDM, but must not be used on silicone O-rings, as this will cause swelling. ERIKS supplies assembly lubricants screened for compatibility with the full range of O-ring materials.
O-ring assortment kits
O-ring kits provide a sorted selection of sizes in a single material for maintenance and quick repair. ERIKS supplies kits in metric (DIN 3771) and imperial (AS568) standards in NBR, EPDM, and FKM, reducing response times in the event of unplanned downtime.
Choosing the right accessories
The selection of accessories is determined by the O-ring material, groove geometry, and media compatibility. ERIKS sealing specialists advise on the correct lubricant grade, tool profile, and kit configuration.
- 11775
- 2534
- 706
- 4689
- 4002
- 706
- 2366
- 1423
- 95
- 64
- 12502
- 519
- 664
15015 Products showing for O-rings
ERIKS O-ring NBR 70 36624 49x5
- Eriks:10027804
- Internal diameter:49 mm
- Cross section:5 mm
ERIKS O-ring NBR 70 36624 84x3
- Eriks:10027978
- Internal diameter:84 mm
- Cross section:3 mm
ERIKS O-ring NBR 70 36624 10x2
- Eriks:10027595
- Internal diameter:10 mm
- Cross section:2 mm
ERIKS O-ring NBR 70 36624 94x3
- Eriks:10028023
- Internal diameter:94 mm
- Cross section:3 mm
ERIKS O-ring FKM 75 51414 ISO3601-014 12,42x1,78
- Eriks:10023244
- Internal diameter:12.42 mm
- Cross section:1.78 mm
- Size according to AS568-BS1806-ISO3601:014
ERIKS O-ring NBR 70 36624 ISO3601-243 104,37x3,53
- Eriks:10027472
- Internal diameter:104.37 mm
- Cross section:3.53 mm
- Size according to AS568-BS1806-ISO3601:243
ERIKS O-ring NBR 70 36624 4x1
- Eriks:10027569
- Internal diameter:4 mm
- Cross section:1 mm
ERIKS O-ring NBR 70 36624 14x2
- Eriks:10027617
- Internal diameter:14 mm
- Cross section:2 mm
ERIKS O-ring VMQ 70 714177 ISO3601-146 66,34x2,62
- Eriks:10026454
- Internal diameter:66.34 mm
- Cross section:2.62 mm
- Size according to AS568-BS1806-ISO3601:146
ERIKS O-ring NBR 70 36624 24,5x1,5
- Eriks:12218353
- Internal diameter:24.5 mm
- Cross section:1.5 mm
ERIKS O-ring NBR 70 36624 80x3
- Eriks:10027958
- Internal diameter:80 mm
- Cross section:3 mm
ERIKS O-ring FKM 75 51414 ISO3601-245 110,72x3,53
- Eriks:10023426
- Internal diameter:110.72 mm
- Cross section:3.53 mm
- Size according to AS568-BS1806-ISO3601:245
ERIKS O-ring NBR 70 36624 25x2,5
- Eriks:10028610
- Internal diameter:25 mm
- Cross section:2.5 mm
ERIKS O-ring NBR 70 36624 55x3,5
- Eriks:10028748
- Internal diameter:55 mm
- Cross section:3.5 mm
ERIKS O-ring FKM 75 51414 6,35x1,78
- Eriks:10023514
- Internal diameter:6.35 mm
- Cross section:1.78 mm
ERIKS O-ring NBR 70 36624 11x2,5
- Eriks:10028546
- Internal diameter:11 mm
- Cross section:2.5 mm
ERIKS O-ring NBR 70 36624 ISO3601-455 329,57x6,99
- Eriks:10027200
- Internal diameter:329.57 mm
- Cross section:6.99 mm
- Size according to AS568-BS1806-ISO3601:455
ERIKS O-ring FKM 75 51414 ISO3601-019 20,35x1,78
- Eriks:10023247
- Internal diameter:20.35 mm
- Cross section:1.78 mm
- Size according to AS568-BS1806-ISO3601:019
ERIKS O-ring NBR 70 36624 71x4
- Eriks:10027917
- Internal diameter:71 mm
- Cross section:4 mm
ERIKS O-ring NBR 70 36624 53x4
- Eriks:10027823
- Internal diameter:53 mm
- Cross section:4 mm
ERIKS O-ring NBR 70 36624 ISO3601-227 53,57x3,53
- Eriks:10027368
- Internal diameter:53.57 mm
- Cross section:3.53 mm
- Size according to AS568-BS1806-ISO3601:227
ERIKS O-ring NBR 70 36624 6x3
- Eriks:10027578
- Internal diameter:6 mm
- Cross section:3 mm
ERIKS O-ring FKM 75 51414 62x2,5
- Eriks:10069144
- Internal diameter:62 mm
- Cross section:2.5 mm
ERIKS O-ring NBR 70 36624 105x2
- Eriks:10028110
- Internal diameter:105 mm
- Cross section:2 mm
ERIKS O-ring NBR 70 36624 6,8x1,9
- Eriks:10028978
- Internal diameter:6.8 mm
- Cross section:1.9 mm