Spherical cutter, N, solid carbide, TiAIN type 2485
Design:Ultra-fine grit solid carbide, type N, according to company standard, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
These tools should only be used in shrink or hydro-.expansion chucks.
Application:Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. Suitable for machining hardened materials up to 54 HRC.
Note:Copy milling; cutting values preferred at ap = 0.05 x d1 and ae = 0.1 x d1.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
These tools should only be used in shrink or hydro-.expansion chucks.
Application:Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. Suitable for machining hardened materials up to 54 HRC.
Note:Copy milling; cutting values preferred at ap = 0.05 x d1 and ae = 0.1 x d1.
- 4
- 1
- 1
- 1
7 of Spherical cutter, N, solid carbide, TiAIN type 2485
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Ball cutter short FS SC type HSC Signum 30deg. shank HA 4mm | Ball nose end mill | 4 | 6 | €166.87/piece | |
| Ball cutter short FS SC type HSC Signum 30deg. shank HA 10mm | Ball nose end mill | 8 | 10 | €161.12/piece | |
| Ball cutter short FS SC type HSC Signum 30deg. shank HA 12mm | Ball nose end mill | 10 | 12 | €308.63/piece | |
| Ball cutter short FS SC type HSC Signum 30deg. shank HA 2mm | Ball nose end mill | 3 | 6 | €171.04/piece | |
| Ball cutter short FS SC type HSC Signum 30deg. shank HA 6mm | Ball nose end mill | 6 | 6 | €129.37/piece | |
| Ball cutter short FS SC type HSC Signum 30deg. shank HA 3mm | Ball nose end mill | 35 | 6 | €177.86/piece | |
| Ball cutter short FS SC type HSC Signum 30deg. shank HA 8mm | Ball nose end mill | 7 | 8 | €131.02/piece |