Milling cutter with shank, NH, solid carbide, Fire type 2485
Design: Ultra-fine grit solid carbide, according to company standard, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. A much longer tool life is achieved than with conventional tools.
Particularly suitable for machining stainless steel.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. A much longer tool life is achieved than with conventional tools.
Particularly suitable for machining stainless steel.
- 1
- 1
- 1
- 1
- 1
7 of Milling cutter with shank, NH, solid carbide, Fire type 2485
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Multi-t. end mill ex.-lg.FS SC FIRE T6 12mm | Multifunctional mill | 45 | 12 | €182.28/piece | |
| Multi-t. end mill ex.-lg.FS SC FIRE T6 8mm | Multifunctional mill | 40 | 8 | €68.73/piece | |
| Multi-t. end mill ex.-lg.FS SC FIRE T6 10mm | Multifunctional mill | 40 | 10 | €131.39/piece | |
| Multi-t. end mill ex.-lg.FS SC FIRE T8 20mm | Multifunctional mill | 65 | 20 | €492.83/piece | |
| Multi-t. end mill ex.-lg.FS SC FIRE T6 6mm | Multifunctional mill | 30 | 6 | €59.25/piece | |
| Multi-t. end mill ex.-lg.FS SC FIRE T10 25mm | Multifunctional mill | 75 | 25 | €1,309.42/piece | |
| Multi-t. end mill ex.-lg.FS SC FIRE T6 16mm | Multifunctional mill | 65 | 16 | €328.35/piece |