Milling cutter with shank, N, solid carbide, Fire type 2468
Design: Type N, DIN 6527, 30°, with centre cut.
Application: Can be used for milling keyways and feather key grooves as well as for universal machining. For milling depths up to max. 1.5 x D. Feed is approx. 50% higher than with a 2-edged cutter.
Ultra-fine grit solid carbide.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for milling keyways and feather key grooves as well as for universal machining. For milling depths up to max. 1.5 x D. Feed is approx. 50% higher than with a 2-edged cutter.
Ultra-fine grit solid carbide.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
- 1
- 1
- 1
- 1
4 of Milling cutter with shank, N, solid carbide, Fire type 2468
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Milling cutter DIN6527 SC FIRE T3 9.0mm | End mill | 16 | 10 | €70.70/piece | |
| Milling cutter DIN6527 SC FIRE T3 7.0mm | End mill | 13 | 8 | €48.84/piece | |
| Milling cutter DIN6527 SC FIRE T3 18mm | End mill | 26 | 18 | €240.10/piece | |
| Milling cutter DIN6527 SC FIRE T3 14mm | End mill | 22 | 14 | €121.22/piece |