Interchangeable insert type 1099
Design: Ultra-finest grain-solid carbide.
High toughness and bend break-resistance. The precise point geometry, 140° point angle and the ratio point thinning result in a self-centring blade geometry. Cutting tolerance h7.
Note: Further dimensions available on request.
Cutting tolerance: m7
Application: Grey cast iron, nodular graphite casting and malleable cast iron.
High toughness and bend break-resistance. The precise point geometry, 140° point angle and the ratio point thinning result in a self-centring blade geometry. Cutting tolerance h7.
Note: Further dimensions available on request.
Cutting tolerance: m7
Application: Grey cast iron, nodular graphite casting and malleable cast iron.
- 1
- 1
- 1
- 1
- 1
- 53
54 of Interchangeable insert type 1099
| Product | Diameter [mm] | Material | Available | Priceexcl. VAT |
|---|---|---|---|---|
| Repl. Cut.ins. VHM GG 36.00mm | 36 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 30.50mm | 30.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 36.50mm | 36.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 18.00mm | 18 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 28.50mm | 28.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 19.00mm | 19 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 17.50mm | 17.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 22.50mm | 22.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 16.50mm | 16.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 37.00mm | 37 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 21.50mm | 21.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 22.00mm | 22 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 30.00mm | 30 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 14.50mm | 14.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 29.50mm | 29.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 25.00mm | 25 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 18.50mm | 18.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 28.00mm | 28 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 16.00mm | 16 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 27.50mm | 27.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 34.50mm | 34.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 14.00mm | 14 | Solid carbide | This product is no longer offered | |
| Repl. Cut.ins. VHM GG 33.50mm | 33.5 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 23.00mm | 23 | Solid carbide | This product is no longer offered | |
| Repl. Cut. ins. VHM GG 25.50mm | 25.5 | Solid carbide | This product is no longer offered |