GH 100 U - slot cutter, 3-fluted type 5546
Design: DIN 6527, with centre cut.
Application: Suitable for universal machining. Feed is approx. 50% higher than with a 2-edged cutter. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.
Ultra-fine grit solid carbide.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Suitable for universal machining. Feed is approx. 50% higher than with a 2-edged cutter. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided.
Ultra-fine grit solid carbide.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
- 1
- 1
- 1
1 of GH 100 U - slot cutter, 3-fluted type 5546
| Product | Type | Diameter [mm] | Maximum working length [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Mill GH 100 U FIRE 05546 DIN6527 LNH hard metal mb 5MM | Keyway cutter | 5 | 10 | €44.00/piece |