Milling cutter with shank N solid carbide type 2483
Design: Ultra-fine grit solid carbide, DIN 6527, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Air cooling recommended.
Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 2 x D.Can also be used for trimming and finishing milling.
Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Air cooling recommended.
Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 2 x D.Can also be used for trimming and finishing milling.
Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized.
- 1
- 1
- 1
- 1
- 1
- 1
6 of Milling cutter with shank N solid carbide type 2483
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Milling cutter DIN6527 SCTiALN T4 shank HB 18mm | Milling cutter with shank | 32 | 18 | €190.85/piece | |
| Milling cutter DIN6527 SCTiALN T4 shank HB 16mm | Milling cutter with shank | 32 | 16 | €138.69/piece | |
| Milling cutter DIN6527 SCTiALN T4 shank HB 6mm | Milling cutter with shank | 13 | 6 | €30.54/piece | |
| Milling cutter DIN6527 SCTiALN T4 shank HB 12mm | Milling cutter with shank | 26 | 12 | €78.78/piece | |
| Milling cutter DIN6527 SCTiALN T4 shank HB 20mm | Milling cutter with shank | 38 | 20 | €210.75/piece | |
| Milling cutter DIN6527 SCTiALN T4 shank HB 14mm | Milling cutter with shank | 26 | 14 | This product is no longer offered |