Milling cutter with shank, N, solid carbide type 2330
Design: Type N, DIN 6527, 30°, with centre cut.
Application: Can be used for milling keyways and feather key grooves as well as for universal machining. For milling depths up to max. 1.5 x D. Feed is approx. 50% higher than with a 2-edged cutter.
Solid carbide (K10/K20).
Application: Can be used for milling keyways and feather key grooves as well as for universal machining. For milling depths up to max. 1.5 x D. Feed is approx. 50% higher than with a 2-edged cutter.
Solid carbide (K10/K20).
- 5
- 1
- 1
- 2
- 1
12 of Milling cutter with shank, N, solid carbide type 2330
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| mill. cutter lg. DIN6527 SC T3 shank HA 20mm | Milling cutter with shank | 32 | 20 | €156.91/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 10mm | Milling cutter with shank | 19 | 10 | €39.19/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 14mm | Milling cutter with shank | 22 | 14 | €77.10/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 5mm | Milling cutter with shank | 10 | 6 | €20.86/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 2mm | Milling cutter with shank | 6 | 6 | €21.71/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 8mm | Milling cutter with shank | 16 | 8 | €23.97/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 16mm | Milling cutter with shank | 26 | 16 | This product is no longer offered | |
| mill. cutter lg. DIN6527 SC T3 shank HA 3mm | Milling cutter with shank | 7 | 6 | €21.71/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 12mm | Milling cutter with shank | 22 | 12 | €56.49/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 6mm | Milling cutter with shank | 10 | 6 | €20.61/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 11mm | Milling cutter with shank | 22 | 12 | €61.80/piece | |
| mill. cutter lg. DIN6527 SC T3 shank HA 4mm | Milling cutter with shank | 8 | 6 | €20.86/piece |