Milling cutter with shank, N, solid carbide, TiAIN type 2383
Design: Ultra-fine grit solid carbide, type N, according to company standard, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Particularly suitable for machining stainless steel.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Particularly suitable for machining stainless steel.
- 1
- 1
- 1
- 1
- 1
7 of Milling cutter with shank, N, solid carbide, TiAIN type 2383
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Multi-tooth end mill longDIN6527 SC TiALN type N shank HB T6-8 12.0mm | Multifunctional mill | 26 | 12 | This product is no longer offered | |
| Multi-tooth end mill longDIN6527 SC TiALN type N shank HB T6-8 18.0mm | Multifunctional mill | 32 | 18 | €180.16/piece | |
| Multi-tooth end mill longDIN6527 SC TiALN type N shank HB T6-8 14.0mm | Multifunctional mill | 26 | 14 | €114.59/piece | |
| Multi-tooth end mill longDIN6527 SC TiALN type N shank HB T6-8 16.0mm | Multifunctional mill | 32 | 16 | €154.05/piece | |
| Multi-tooth end mill longDIN6527 SC TiALN type N shank HB T6-8 10.0mm | Multifunctional mill | 22 | 10 | €67.39/piece | |
| Multi-tooth end mill longDIN6527 SC TiALN type N shank HB T6-8 8.0mm | Multifunctional mill | 19 | 8 | €45.03/piece | |
| Multi-tooth end mill longDIN6527 SC TiALN type N shank HB T6-8 20.0mm | Multifunctional mill | 38 | 20 | €226.37/piece |