Milling cutter with shank H, solid carbide, TiAIN type 2381
Design: Ultra-fine grit solid carbide, type H, according to company standard, 45°, TiAIN-coated, with centre cut.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Suitable for HSC machining up to 62 HRC.
Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.
Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Suitable for HSC machining up to 62 HRC.
- 1
- 1
- 1
- 1
- 1
7 of Milling cutter with shank H, solid carbide, TiAIN type 2381
| Product | Type | Maximum working length [mm] | Shaft Diameter [mm] | Available | Priceexcl. VAT |
|---|---|---|---|---|---|
| Multi-t. end mill FS SC TiALN type H shank HA T6-8 12mm | Multifunctional mill | 26 | 12 | €95.20/piece | |
| Multi-t. end mill FS SC TiALN type H shank HA T6-8 25mm | Multifunctional mill | 44 | 25 | €405.67/piece | |
| Multi-t. end mill FS SC TiALN type H shank HA T6-8 16mm | Multifunctional mill | 32 | 16 | €165.16/piece | |
| Multi-t. end mill FS SC TiALN type H shank HA T6-8 20mm | Multifunctional mill | 38 | 20 | This product is no longer offered | |
| Multi-t. end mill FS SC TiALN type H shank HA T6-8 10mm | Multifunctional mill | 22 | 10 | €73.07/piece | |
| Multi-t. end mill FS SC TiALN type H shank HA T6-8 6mm | Multifunctional mill | 13 | 6 | €38.59/piece | |
| Multi-t. end mill FS SC TiALN type H shank HA T6-8 8mm | Multifunctional mill | 19 | 8 | This product is no longer offered |